Product Reviews

Great holster

Definitely worth getting if you are using the multi-tube feeder. Does a great job at loading the tube, and getting cases oriented properly in the tube.

Works well, I was a little frustrated with having to drum sand to fit the Dillon Case adapter. Takes some getting used to vs. single tube, but works well unless you let a case get in upside down, then a bit messy trying to shut off, pull off the machine and straighten out. Double and triple check case orientation before mounting on the machine!

Works great, a bit different than the EGW 7-round though, which also gauge max COAL when cartridge is dropped in. I can still tell COAL consistency by visual check of rim height above gauge, and manually caliper at the start of a batch. Good go/no go volume gauge for under crimp, gross COAL deviations, uneven seating or swollen cases.

It definitely helps with the bunching of the inner belt when using a ratcheting closure… but it’s not a super flexi material… they just removed the Velcro from a short portion of the belt. I don’t understand the logic behind the placement of the flexible portion… it’s 10-12” from the belt end. Are people placing their ratchet on their front or strong side? I don’t think so. The flexible portion should be 180° opposite of the closure. Swing and a miss by DAA on this one. Fix the placement of the flexi-bit and you’ve got a viable solution for a problem. ????

Purchased this for a Hornady LNL AP. It replaced the powder cop in station 3. Hands down this is an excellent AUDIO/VISUAL AID, especially when your progressive press is working at optimum volume, it preforms as specified. Well worth the extra safety it provides. Important Note: A hornady LNL AP press equipped with case activated powder drop & equipped with optional with PTX powder measure and expanders. The powder drop PTX must be positioned away from the strong magnet on the DAA powder check 2.0. Real estate is tight for positioning, but it is doable without operational interference with the primer tube or sizing, decapper die in station 1.