Product Reviews

The addition of this shell plate and included excess brass control finger reduced my inverted cartridge rate to less than one percent. My factory Dillon XL750 shell plate and hardware that was designed to reduce bind up in the shell carrier had about a 6% error rate which was maddening. I have had an opportunity to deal with a few other Double Alpha products concerns on products they have made for other well known manufacturers, when the manufacturer declined to honor warranty terms, double alpha came through. I buy items for their quality hoping not to use their warranty, but things happen beyond the control of the manufacturer, it’s nice to have a go to company like double alpha to reduce the issue of making decisions regarding quality vs cost.

All of the Double Alpha products for reloading have been good additions to my reloading set-up. As I add additional machines I return to the Double Alpha site to purchase the same upgrades for my equipment. I currently have multiple Mr. BulletFeeders and when I had a problem with one of the motors Double Alpha was quick to respond to my issue and provide the necessary motor at a very reasonable cost.

At first, I loved that you could adjust these in so many different ways. Then I realized how difficult it is to set them up. It took hours to find angles the worked for me. This meant loosening and tightening the torx screws A LOT. Not only did I strip a torx screw, but I completely disabled its use until I find another screw to replace it. DAA offered to replace th hangers, which is great...but the product design itself is flawed. You should figure out a way to utilize a QD locking mechanism instead of a torx screw. The torx screw is it's weakest point. I had a better experience with your Racer mag pouches that didn't use a ball joint hanger. I had high hopes for this mag pouch and was let down.

Excellent item very good service quality part

Save yourself time and buy it. So glad I did. It loads all tubes with brass in under 4 minutes.

Works great! Viewing the video on setup made it easy to setup and mount to my press. Just need to take your time cycling the press and watching the process. Still faster and easier than hand feeding brass. I reload .45 Colt and 44 Mag and had to modify the .45 ACP orange tube by filing it out. I also had to file out the hole on the bottom of the case feeder magazine tube as well so brass would drop through it. Double Alpha sent me instructions on how to do this. I would recommend to a friend.