DAA 1" Die, Box-End Wrench

Mga pangunahing tampok

Pumili ng mga Opsyon
12.95
€0.50 Mga puntos ng gantimpala
I-save para sa Mamaya
(11)
 Nasa stock

Mga pinakabagong review

Ken ***
25 Jan 2023
This is a well made wrench, I was hoping it would work with my RCBS, Lyman & Lee die lock rings. Unfortunately it doesn't so I will just give it to my friend that has a Dillion press. It would be great it they would make one for RCBS die lock rings.
Rating: (4 ng 5 Star!)
Robert C ***
17 Dec 2021
Works great, a little thinner around the large portion would be better, but so far it works almost as well as my home made cut and ground down box end wrench.
Rating: (4 ng 5 Star!)
Howard ***
4 Jul 2021
The wrench is good and fits the lock rings well.

My issue is that the small 6pt end of the wrench does NOT fit the Dillon powder bar adjustment screw (7/16"). Not only that, it doesn't even fit 10mm (it's off by 0.001-2). So, forget about using it for that, just use it for the lock rings.

Is it...
Rating: (2 ng 5 Star!)
Brian ***
1 Jul 2020
The DAA box wrench is what I needed to protect my dies. I was so frustrated with the Dillon open end wrench rounding off flats on die nuts. If you don't have one..get one, you'll thank me later. Fast friendly service from DAA..every time.
Rating: (5 ng 5 Star!)
Daniël ***
8 May 2020
very nice
maybe time to make them for the other sizes to
Rating: (5 ng 5 Star!)
Doug ***
16 Apr 2020
This is a great tool! I have a Dillon 650 and one of my only complaints of it is trying to tighten the die lock rings is a pain especially with the Dillon wrench which is very sloppy in fit which rounds off the corners of the lock rings. Also being a typical wrench design/shape, the Dillon wrench...
Rating: (4 ng 5 Star!)
Iniirerekomenda rin namin

Deskripsyon:

Tulad ng alam ng anumang reloader, ang pag-aadjust ng isang die sa isang maikli at masikip na tool head ay maaaring mahirap at nakakainis. Ang mga die nuts at iba't ibang bahagi ng makina ay hindi nagbibigay ng madaling access at ang paggamit ng regular wrench ay halos hindi kaya.

Ang DAA 1 Inch Box-End Wrench ay ang solusyon sa problemang ito! Ang custom made, laser cut, stainless steel wrench ay matibay na sapat upang magtagal ng isang pagkabuhay at manipis na pader para mag-fit sa anumang dies para sa madaling access at pag-aadjust. Ang maramihang mga bunganga ay nagbibigay-daan sa handle na mailagay sa pinakasulit na anggulo para maigapos ang mga mahirap abutin na nuts.

Ang tool na ito ay idinisenyo para gamitin sa 1" nuts at hindi kakasya sa 1-1/8" na ginagamit sa ilang dies. Inirerekomenda naming palitan ang anumang mas malalaking die nuts sa standard 1" nuts, na magbibigay-daan sa iyo na gamitin ang tool na ito para sa lahat ng iyong dies, at magbibigay sa iyo ng mas maluwag na puwang at access sa iyong tool head.

Isang pakete ng 5x 1" die nuts ay available bilang combo rin.

Specifications:

Uri ng Tool: Box-End custom Wrench, 1 pulgada

Haba: 120mm

Kapal: 6mm

Materyal: stainless steel

Pinong Laser cut at engraved

 

Nota: Ang mga nuts ay hindi kasama. 

Iniirerekomenda rin namin
Maaari Ring Makita Sa Mga Set

Bagong mga produkto

Mahalagang Paalala
€313.95 €282.56
€31.39
Mahalagang Paalala
€328.95 €296.06
€32.89
Mahalagang Paalala
5.95
Mahalagang Paalala
4.95
Mahalagang Paalala
14.95