Must have upgrade. This plate is so efficient at orienting and dropping pistol cases. The entire operation is so much quieter! Turn the Dillon case feeder speed down and it still easily can keep pace with you. It really is what Dillon should have used from the beginning.

Highly recommended add-on to the Dillon Case Feeder. Haven't had any jams or other problems. Case Feeder an plate run smoothly and do what they are supposed to.

I got two of this plates one in the Dillon case feeder and now I installed the second to my new Hornady feeder. For 9mm cases the dislog wedge must be installed otherwise the cases block the plate against the feeder. I tried out the correct position an drilled two holes in the feeder and now it runs very well.

If DAA makes a printable drilling mask for the Hornady this would be practicable to anybody who has no experience in correct positioning the wedge.

My older (10+ years) Dillon case feeder is connected to a Rollsizer decapper. I am decapping 9 mm. With the OEM plate in the case feeder wasn't able to keep up with the decapper even when it was on the slowest setting. I changed the plate to a DAA Turbo Case-Feeder Plate and now the case feeder easily keeps up with the decapper even when it is on its fastest setting. I still have some issues with 2 cases occasionally dropping through the plate and this usually causes a jam. The problem seems to be in the case feeder design. I'll be buying a new one and that hopefully will take care of the issue.

Works fantastic. I've loaded about 2k rounds with it so far and no issues.

Installed this in my Hornady Case Feeder. It is an exact fit and actually speeds up the process due to the number and shape of the cartridge slots. The Dislodge-Wedge alone is worth the price. I have been monkeying around with this problem for years, and the DAA design is exactly what I have been looking for. Since installation of the pair, I have loaded over 8,000 rounds of 9mm with zero case jams. Excellent products!.